We are happy to advise you!
0845 470 1000     Contact

Instructor-Led Online Training (ILO)
Live Online Classes in the Virtual Classroom

Find out more and view dates

Implementing and Administering Cisco Solutions - Extended (CCNA8D)

Detailed Course Outline

  • Lecture: Exploring the Functions of Networking
  • Lecture: Introducing the Host-to-Host Communications Model
  • Lecture: Operating Cisco IOS Software
  • Lecture: Introducing LANs
  • Lecture: Exploring the TCP/IP Link Layer
  • Lecture: Starting a Switch
  • Lecture: Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets
  • Lecture: Explaining the TCP/IP Transport Layer and Application Layer
  • Lecture: Exploring the Functions of Routing
  • Lecture: Configuring a Cisco Router
  • Lecture: Exploring the Packet Delivery Process
  • Lecture: Troubleshooting a Simple Network
  • Lecture: Introducing Basic IPv6
  • Lecture: Configuring Static Routing
  • Lecture: Implementing VLANs and Trunks
  • Lecture: Routing Between VLANs
  • Lecture: Introducing OSPF
  • Lecture: Building Redundant Switched Topologies
  • Lecture: Improving Redundant Switched Topologies with EtherChannel
  • Lecture: Exploring Layer 3 Redundancy
  • Lecture: Introducing WAN Technologies
  • Lecture: Explaining Basics of ACL
  • Lecture: Enabling Internet Connectivity
  • Lecture: Introducing QoS
  • Lecture: Explaining Wireless Fundamentals
  • Lecture: Introducing Architectures and Virtualization
  • Lecture: Explaining the Evolution of Intelligent Networks
  • Lecture: Introducing System Monitoring
  • Lecture: Managing Cisco Devices
  • Lecture: Examining the Security Threat Landscape
  • Lecture: Implementing Threat Defense Technologies
  • Lecture: Securing Administrative Access
  • Lecture: Implementing Device Hardening

Lab outline

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLAN and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure a Router on a Stick
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Log into the WLC
  • Monitor the WLC
  • Configure a Dynamic (VLAN) Interface
  • Configure a DHCP Scope
  • Configure a WLAN
  • Define a Remote Access Dial-In User Service (RADIUS) Server
  • Explore Management Options
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening
  • Configure Root Bridge and Analyse STP Topology
  • Troubleshoot STP Issues
  • Configure and Verify HSRP
  • Troubleshoot HSRP
  • Configure Serial Interface and PPP
  • Configure and Verify MLP