NetApp
> > > ANCDABC87

Accelerated NCDA Bootcamp 7-mode (ANCDABC87)

 

Lab Topology

Course Description

Lab Exercises

  • Lab 1-1 Identify the exercise environment
  • Lab 1-2 Log in to the exercise environment
  • Lab 1-3 Install NetApp System Manager
  • Lab 1-4 Allow NetApp System Manager access through Windows firewall
  • Lab 2-1 Identify the exercise environment
  • Lab 2-2 Log in to your assigned storage system
  • Lab 2-3 Log in to NetApp System Manager and add your storage system
  • Lab 3-1 License and configure the NFS service
  • Lab 3-2 Add an administration host using the setup command
  • Lab 4-1 Mount the root volume of the storage system on an administration host
  • Lab 4-2 Export a volume using the command-line interface
  • Lab 4-3 Rename a volume and verify the automatic export
  • Lab 4-4 Export and mount a qtree
  • Lab 4-5 Export to a subnet
  • Lab 4-6 Export to a netgroup
  • Lab 4-7 Export a qtree using NetApp System Manager
  • Lab 4-8 Mount an export from an admin host
  • Lab 5-1 Identify the exercise environment
  • Lab 6-1 Configure a storage system for a Windows Workgroup environment
  • Lab 6-2 Review the results of CIFS setup in a Windows Workgroup environment
  • Lab 7-1 View current shares
  • Lab 7-2 Create a new share using the command-line interface
  • Lab 7-3 Verify share access and display session information
  • Lab 8-1 Add a new local user account and configure user access
  • Lab 8-2 Access a network drive and work with access control
  • Lab 8-3 Create a local group
  • Lab 9-1 Terminate CIFS services using NetApp System Manager
  • Lab 9-2 Configure DNS with NetApp System Manager
  • Lab 9-3 Configure time services with NetApp System Manager
  • Lab 9-4 Reconfigure the CIFS services using NetApp System Manager
  • Lab 9-5 Create a 32-bit aggregate using NetApp System Manager
  • Lab 9-6 Create a volume using NetApp System Manager
  • Lab 9-7 Create shares and manage the permissions of the shares
  • Lab 9-8 Create a domain user
  • Lab 9-9 Create a share with computer management
  • Lab 9-10 Map shares to drive letters
  • Lab 9-11 Display CIFS sessions
  • Lab 10-1 Configure your storage system for multiprotocol access
  • Lab 12-1 Identify the components of your SAN exercise environment
  • Lab 14-1 Configure iSCSI on a storage system
  • Lab 14-2 Configure Windows for MPIO
  • Lab 14-3 Install the NetApp DSM for Windows
  • Lab 14-4 Install the NetApp host utilities for Window
  • Lab 14-5 Configure iSCSI on Windows
  • Lab 14-6 Confirm an iSCSI session on a storage system
  • Lab 14-7 Configure a second iSCSI session on Windows
  • Lab 14-8 Confirm the second iSCSI session on a storage system
  • Lab 14-9 Install host utilities on Red Hat Linux
  • Lab 14-10 Install the iSCSI software initiator for Red Hat Linux
  • Lab 14-11 Configure the iSCSI software initiator on Red Hat Linux
  • Lab 14-12 Confirm an iSCSI session or iSCSI sessions on a storage system
  • Lab 15-1 Create a LUN using commands
  • Lab 15-2 Initialize a LUN with disk management
  • Lab 15-3 Provision a LUN with disk management
  • Lab 15-4 Make the mounting of a LUN persistent
  • Lab 15-5 Create iSCSI-attached LUNS for Red Hat Linux
  • Lab 15-6 Discover iSCSI-accessible LUNs from Red Hat Linux
  • Lab 15-7 Prepare an individual LUN and mount it on Red Hat Linux
  • Lab 16-1 Identify the exercise environment
  • Lab 17-1 Create a Snapshot copy using NetApp System Manager
  • Lab 17-2 Restore a Windows file from a Snapshot copy
  • Lab 17-3 Restore a Unix or Linux file from a Snapshot copy
  • Lab 17-4 Manage Snapshot copies using NetApp System Manager
  • Lab 17-5 Create a FlexClone clone using the command-line interface
  • Lab 18-1 License and configure the SnapRestore software
  • Lab 18-2 Restore a volume using SnapRestore technology
  • Lab 18-3 Restore a file using SnapRestore technology
  • Lab 19-1 Identify primary and secondary systems
  • Lab 19-2 Configure SnapVault on the primary system
  • Lab 19-3 Configure SnapVault on the secondary system
  • Lab 19-4 Initialize the transfer
  • Lab 19-5 Perform a restore
  • Lab 19-6 Restart the backup relationship
  • Lab 20-1 Install Open Systems SnapVault for Windows server
  • Lab 20-2 Configure the SnapVault secondary system
  • Lab 20-3 Configure Windows Server 2008 R2’s firewall for Open Systems SnapVault
  • Lab 20-4 Establish the Open Systems SnapVault baseline
  • Lab 20-5 Perform a restore and resume SnapVault operations
  • Lab 21-1 License and configure controller failover
  • Lab 21-2 Perform a controller failover
  • Lab 21-3 Perform a controller giveback
  • Lab 23-1 Identify the source and destination systems
  • Lab 23-2 Set up SnapMirror on the source storage system
  • Lab 23-3 Set up SnapMirror on the destination storage system
  • Lab 23-4 Initiate a baseline transfer and schedule updates
  • Lab 23-5 Break the SnapMirror relationship
  • Lab 23-6 Resynchronizing the relationship
  • Lab 23-7 Reinstate the original SnapMirror relationship
  • Lab 23-8 Configure synchronous SnapMirror
 

Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.   Got it!